Product Reviews

FIFINE U1 Mic Pop Filter Review

A compact, mic-mounted pop filter for compatible FIFINE and other similarly sized microphones used for streaming, voice-overs, and podcasts.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The FIFINE U1 Mic Pop Filter Screen review is for creators who want a compact shield that attaches directly to a compatible microphone.

Its curved metal mesh and replaceable rubber bands suit desk or boom-mic setups where a traditional filter in front of the mic would get in the way.

FIFINE U1 Filter Review Summary

The quick verdict

FIFINE U1 Mic Pop Filter
4.6/5

500+ ratings

Read Amazon Reviews

FIFINE U1 Mic Pop Filter

A compact, mic-mounted pop filter for compatible FIFINE and other similarly sized microphones used for streaming, voice-overs, and podcasts.

  • Curved metal mesh screen designed to block wind, air blasts, and plosive noise.
  • Wraparound shape helps keep moisture away from the microphone diaphragm.
  • Designed for specified FIFINE models including K669/K669B, K670/K670B, K683A, K678, and K690.
  • Also specified for microphones measuring 40–70 mm in diameter; the manufacturer advises against pairing it with dynamic models such as AM8, K688, and TANK3.

Pros

  • Attaches to the microphone itself, keeping the setup compact.
  • The mesh screen addresses plosives, wind, and air blasts while also helping keep moisture away from the diaphragm.

Consider before buying

  • Compatibility depends on microphone model, diameter, and type, so buyers should verify all three before ordering.
  • FIFINE advises against use with certain dynamic microphones, including the AM8, K688, and TANK3.
Read the full review summary

The U1 wraps around the microphone rather than sitting on a separate arm in front of it.

Its metal mesh is designed to reduce wind, air blasts, and plosive noise, while the enclosing shape also helps keep moisture away from the mic diaphragm.

A small handle attached to the rubber band is intended to make installation and removal straightforward.

Fit is the key buying question. The filter is specified for FIFINE K669/K669B, K670/K670B, K683A, K678, and K690 microphones, as well as microphones measuring 40–70 mm in diameter.

FIFINE advises against using it with dynamic models such as the AM8, K688, and TANK3, so check your exact mic model and type before choosing it.

The buying factors

FIFINE U1 Filter Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

7/10

Mic compatibility

Several FIFINE models and a 40–70 mm diameter range are specified, but the fit guidance also rules out some dynamic microphones.

9/10

Compact setup

The mic-mounted curved screen avoids the separate, front-positioned shield design.

8/10

Plosive control design

The metal mesh is designed to block wind, air blasts, and plosive noise at the microphone.

8/10

Mic protection

The wraparound screen helps keep moisture away from the diaphragm, and a soft rubber pad protects the mic surface from scratches.

8/10

Fit flexibility

Two replacement bands in different dimensions let buyers swap bands to suit a larger compatible microphone.

8/10

Setup simplicity

A custom handle on the rubber band is intended to make fitting the filter easy.

Key Features and Specifications of FIFINE U1 Filter

  • Curved metal mesh screen designed to block wind, air blasts, and plosive noise.
  • Wraparound shape helps keep moisture away from the microphone diaphragm.
  • Designed for specified FIFINE models including K669/K669B, K670/K670B, K683A, K678, and K690.
  • Also specified for microphones measuring 40–70 mm in diameter; the manufacturer advises against pairing it with dynamic models such as AM8, K688, and TANK3.
  • Two flexible replacement bands are included, measuring 1 4/5 inches and 2 1/5 inches.
  • Soft rubber padding inside the frame is intended to protect the microphone from scratches; the package includes a user manual. Microphone is not included.

Pros and Cons of FIFINE U1 Filter

Pros

  • Attaches to the microphone itself, keeping the setup compact.
  • The mesh screen addresses plosives, wind, and air blasts while also helping keep moisture away from the diaphragm.
  • Two extra band sizes provide a way to adjust the fit for compatible microphones.
  • A soft rubber pad helps protect the microphone finish from scratches.

Consider before buying

  • Compatibility depends on microphone model, diameter, and type, so buyers should verify all three before ordering.
  • FIFINE advises against use with certain dynamic microphones, including the AM8, K688, and TANK3.
  • The filter mounts around the microphone, so confirm that its curved shape will fit your mic and preferred recording position.

Who Should Buy FIFINE U1 Filter?

Good fit

Consider the U1 if you use one of the specified FIFINE microphones or another microphone within the stated 40–70 mm diameter range, and want a pop shield that mounts directly to the mic.

That arrangement may suit a compact desk or boom setup, especially when a separate filter arm would crowd the space or obstruct your face during recording.

Its design offers more than a mesh barrier: the wraparound screen helps keep moisture away from the diaphragm, and the padded frame is intended to prevent scratches.

The two included replacement bands give you another fit option if the original band does not suit a larger compatible mic.

Before buying, compare your microphone’s exact model and diameter with the compatibility guidance, and check the advice about dynamic models. The microphone is not included, so this is an accessory purchase for a setup you already own.

Who should skip it

Skip the U1 if your microphone is among the dynamic models FIFINE advises against using it with, or if you cannot confirm that your mic falls within the stated compatibility guidance.

A separate pop shield may be a better fit if you specifically want a filter positioned on its own arm in front of the microphone.

How the FIFINE U1 Filter Fits a Recording Setup

A mic-mounted alternative to a separate shield

The U1’s curved form attaches around the microphone instead of positioning a broad filter on a separate arm. That keeps the arrangement compact and may make it easier to preserve a clear view during a podcast or voice-over.

Buyers should still check the screen’s position on their particular mic to see how it affects access and speaking distance.

Check model, diameter, and microphone type

The named FIFINE models and 40–70 mm diameter range offer a practical starting point for checking fit.

Diameter alone is not the full guidance: FIFINE specifically advises against using the U1 with dynamic microphones such as the AM8, K688, and TANK3. Confirm the model and type as well as the measurement before deciding.

What the curved mesh is designed to do

The metal mesh is intended to reduce wind, air blasts, and plosive noise, while the wraparound shape helps keep moisture away from the diaphragm.

These design goals make the accessory relevant to close-mic speech recording, but the description does not establish a measured level of noise reduction.

Treat it as a compact physical shield rather than a substitute for checking mic placement and recording technique.

Band options and handling

A handle on the rubber band supports fitting the screen, and two replacement bands provide different dimensions for adjusting the fit. The soft pad inside the frame is intended to protect the microphone from scratches.

When fitting it, use the band that holds the frame securely without forcing it against the microphone.

Alternatives to FIFINE U1 Filter

No alternative model is recommended here. Compare the design and features that matter to your routine before choosing another option.

Is FIFINE U1 Filter Worth It?

The FIFINE U1 Mic Pop Filter is worth considering for owners of a compatible microphone who want a compact, mic-mounted shield with metal mesh and replaceable bands.

Its wraparound design also helps keep moisture away from the diaphragm, and the padded frame is intended to protect the mic finish.

Check your exact microphone model, diameter, and type first, especially if you use a dynamic mic.

If the U1 fits those constraints and you prefer a filter attached directly to the mic, it is a focused accessory to consider; if your setup calls for a separate arm-mounted shield, its design may not suit your preference.

Your review at a glance

FIFINE U1 Mic Pop Filter
4.6/5

500+ ratings

Read Amazon Reviews

FIFINE U1 Mic Pop Filter

A compact, mic-mounted pop filter for compatible FIFINE and other similarly sized microphones used for streaming, voice-overs, and podcasts.

  • Curved metal mesh screen designed to block wind, air blasts, and plosive noise.
  • Wraparound shape helps keep moisture away from the microphone diaphragm.
  • Designed for specified FIFINE models including K669/K669B, K670/K670B, K683A, K678, and K690.
  • Also specified for microphones measuring 40–70 mm in diameter; the manufacturer advises against pairing it with dynamic models such as AM8, K688, and TANK3.

Written by

latalklive.com Editorial Team

Editorial team

Independent editorial coverage of talk, audio & culture.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

FIFINE U1 Mic Pop Filter

FIFINE U1 Mic Pop Filter

A compact, mic-mounted pop filter for compatible FIFINE and other similarly sized microphones used for streaming, voice-overs, and podcasts.

  • Curved metal mesh screen designed to block wind, air blasts, and plosive noise.
  • Wraparound shape helps keep moisture away from the microphone diaphragm.
Check Video Reviews on Amazon