Product Reviews

SmallRig 1138 Super Camera Clamp Mount Review

A compact clamp and ball-head mount for creators who need to attach a light camera accessory to a rod, table, or frame.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig 1138 camera clamp review centers on a compact mount that combines a clamp, double ball head, and 1/4-inch screw for positioning small camera accessories.

Its appeal is flexible placement around a desk, tube, or frame, with a stated load limit that makes careful equipment matching essential.

SmallRig 1138 Clamp Review Summary

The quick verdict

SmallRig 1138 Super Camera Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp Mount

A compact clamp and ball-head mount for creators who need to attach a light camera accessory to a rod, table, or frame.

  • Combines a super clamp, double ball head, and 1/4-inch-20 screw for mounting compatible gear.
  • Designed to clamp onto a rod, tube, table, frame, or tripod without drilling.
  • Listed for action cameras, cameras, monitors, cellphones, microphones, and LED lights.
  • Includes a separate action-camera mount adapter.

Pros

  • Combines clamping and angle positioning in one compact mount.
  • The 1/4-inch-20 connection supports a range of small camera accessories.

Consider before buying

  • The 1.5 kg maximum calls for conservative load matching, especially when the setup will move.
  • A suitable clamp surface and compatible attachment point are still required; confirm both before purchase.
Read the full review summary

The 1138 combines a super clamp with a double ball-head adapter and 1/4-inch-20 screw, giving compatible cameras, monitors, lights, microphones, and action cameras a way to attach to a rod, tube, table, frame, or tripod.

The locking knob is intended to secure the clamp at the mounting point, while the ball-head arrangement allows angle adjustment. Its aluminum and stainless-steel construction keeps the design focused on a reusable piece of rigging hardware.

This setup suits creators who want to place a small accessory where a conventional camera shoe or tripod position is inconvenient.

The stated maximum load is 1.5 kg, but that figure should be treated as a ceiling, not a target for every orientation or dynamic setup.

Check the accessory’s mounting interface, total weight, and the shape and diameter of the surface you plan to clamp before relying on it.

The package includes an action-camera mount adapter, and the product calls for a safety rope in dynamic scenarios.

The buying factors

SmallRig 1138 Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp can attach to several kinds of supports, including rods, tubes, tables, frames, and tripods, subject to a suitable fit.

8/10

Accessory compatibility

A 1/4-inch-20 screw and included action-camera adapter support a broad set of small camera accessories.

8/10

Angle adjustment

The double ball-head design is intended to help position attached gear at a chosen angle.

7/10

Load guidance

A 1.5 kg maximum is provided, giving buyers a useful limit for matching equipment, though it is not a promise for every setup.

8/10

Portability

At 0.2 kg and roughly 3.74 by 3.35 by 0.98 inches, it is a compact addition to a camera kit.

8/10

Build materials

Aluminum and stainless steel form the described clamp and mounting hardware.

Key Features and Specifications of SmallRig 1138 Clamp

  • Combines a super clamp, double ball head, and 1/4-inch-20 screw for mounting compatible gear.
  • Designed to clamp onto a rod, tube, table, frame, or tripod without drilling.
  • Listed for action cameras, cameras, monitors, cellphones, microphones, and LED lights.
  • Includes a separate action-camera mount adapter.
  • The stated maximum weight capacity is 1.5 kg.
  • Constructed from aluminum and stainless steel; listed dimensions are 3.74 × 3.35 × 0.98 inches, with a weight of 0.2 kg.

Pros and Cons of SmallRig 1138 Clamp

Pros

  • Combines clamping and angle positioning in one compact mount.
  • The 1/4-inch-20 connection supports a range of small camera accessories.
  • Can attach to several common support shapes without drilling.
  • Includes an action-camera adapter for an additional mounting option.

Consider before buying

  • The 1.5 kg maximum calls for conservative load matching, especially when the setup will move.
  • A suitable clamp surface and compatible attachment point are still required; confirm both before purchase.
  • For dynamic use, plan to attach a safety rope as directed.

Who Should Buy SmallRig 1138 Clamp?

Good fit

Consider the SmallRig 1138 if you need to place a light camera accessory on a desk edge, rod, tube, frame, or tripod and want to adjust its angle after clamping.

The combination of the clamp, ball head, and standard 1/4-inch-20 screw can reduce the number of separate mounting pieces needed for a simple rig.

It is a more suitable choice when your accessory is comfortably below the stated 1.5 kg maximum and its attachment interface matches the included screw or action-camera adapter.

Before buying, compare the accessory’s weight and connection with the clamp position you intend to use, and make sure the support surface can be gripped securely.

For a setup that may shift or move, use the safety rope called for in the product guidance. That extra step matters when positioning equipment above a desk, near a camera, or on a vehicle.

Who should skip it

Skip this design if your planned equipment exceeds the 1.5 kg maximum, needs a connection other than the supplied interfaces, or must be mounted to a surface the clamp cannot securely grip.

Choose another mounting approach if you need a dedicated support for a heavier or more complex rig; this compact clamp is described for smaller camera accessories.

How the SmallRig 1138 Clamp Fits a Camera Setup

One clamp, several placement options

The 1138 is built around securing to a support surface rather than attaching only to a camera shoe. Its stated options—rod, tube, table, frame, and tripod—make it useful for repositioning an accessory around a work area.

Since no jaw range is given here, check the target support’s dimensions and shape before ordering.

Ball-head adjustment for accessory placement

The double ball-head adapter gives the mount an angle-adjustment role in addition to clamping. That can help orient a monitor, light, microphone, or action camera after choosing a support point.

The practical value depends on the accessory’s weight and the geometry of the setup, so keep the load comfortably within the stated ceiling.

Match the connection and load

The 1/4-inch-20 screw covers many compact camera accessories, and the included action-camera adapter adds another mounting route.

Confirm that the device uses one of these interfaces and consider its complete mounted weight, including any attached accessories, before installing it.

Plan for movement

A clamp attached to a moving or vibrating setup faces different conditions from one on a stationary desk. The product specifically advises using a safety rope in dynamic scenarios.

Treat the clamp as one part of a secure setup and check both the gripping surface and the accessory connection before use.

Alternatives to SmallRig 1138 Clamp

Camera Mounts & Clamps alternative

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit

Choose the 1138 for a compact clamp-and-ball-head setup with an included action-camera adapter.

Consider the 2732 if you need a longer reach from the clamp or want its stated 3/8-inch connection options; confirm the arm’s reach and interfaces suit your rig.

  • The 2732 includes a separate 9.8-inch articulating arm and super clamp, with 1/4-inch and 3/8-inch threaded connections on the clamp and 1/4-inch screws at both arm ends.
  • Its clamp opening is listed from 15 mm to 54 mm.
  • The 1138 combines its clamp and double ball-head mount in a compact unit and includes an action-camera adapter.

Camera Mounts & Clamps alternative

SmallRig Super Clamp 735-SR
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp 735-SR

Consider the 735-SR if you already have a compatible ball head or arm and mainly need a clamp with threaded attachment points.

The 1138 is the more complete choice when you want the ball-head positioning and action-camera adapter included in the same mount.

  • The 735-SR is a standalone super clamp with 1/4-inch and 3/8-inch threaded holes.
  • Its jaw range is listed as 15 mm to about 40 mm, and its rubber pads are intended to help prevent slipping and scratching.
  • The 1138 adds a double ball head and 1/4-inch-20 screw to its clamp, and it includes an action-camera mount adapter.

Is SmallRig 1138 Clamp Worth It?

The SmallRig 1138 is worth considering for creators who need a compact way to clamp a light camera accessory to a nearby support and adjust its angle.

Its combination of a double ball head, 1/4-inch-20 screw, and action-camera adapter gives it practical range for small rigs.

Buy only after checking that your support surface and accessory connection are compatible and that the complete load stays comfortably below the 1.5 kg maximum.

For dynamic use, include the advised safety rope; if your setup is heavier or needs a different connection, this clamp may not be the right fit.

Your review at a glance

SmallRig 1138 Super Camera Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp Mount

A compact clamp and ball-head mount for creators who need to attach a light camera accessory to a rod, table, or frame.

  • Combines a super clamp, double ball head, and 1/4-inch-20 screw for mounting compatible gear.
  • Designed to clamp onto a rod, tube, table, frame, or tripod without drilling.
  • Listed for action cameras, cameras, monitors, cellphones, microphones, and LED lights.
  • Includes a separate action-camera mount adapter.

Written by

latalklive.com Editorial Team

Editorial team

Independent editorial coverage of talk, audio & culture.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Super Camera Clamp Mount

SmallRig 1138 Super Camera Clamp Mount

A compact clamp and ball-head mount for creators who need to attach a light camera accessory to a rod, table, or frame.

  • Combines a super clamp, double ball head, and 1/4-inch-20 screw for mounting compatible gear.
  • Designed to clamp onto a rod, tube, table, frame, or tripod without drilling.
Check Video Reviews on Amazon