The SMALLRIG Universal Phone Holder Mount review is for creators who want a flexible way to position a smartphone on a camera or tripod.
Its adjustable clamp, rotating joints, and top cold shoe suit photography, livestreaming, vlogging, and interviews.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A versatile clamp for creators who want to mount a range of smartphones on a camera or tripod and add a light or microphone.
- Phone clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the bottom cold shoe.
Pros
- Fits phones across a useful 57–88 mm width range.
- Supports both portrait and landscape framing with a 90-degree locking position.
Consider before buying
- The 500 g maximum load requires buyers to account for the phone and any mounted accessories together.
- A clamp takes more hands-on positioning than a magnetic mount designed for compatible phones.
Read the full review summary
The 4382 combines a phone clamp with a camera or tripod connection, portrait and landscape rotation, and a cold shoe for an accessory such as a microphone or light.
Its broad stated width range of 57–88 mm is useful for households or teams using different phones, while the 500 g load capacity gives a concrete limit to keep in mind when planning a mounted setup.
This mount is best suited to someone who wants one holder for several phone sizes and values adjustability and accessory mounting over a magnetic quick-release approach.
It is a compact, 73 g accessory, but buyers should check their phone’s width and the total load of the mounted phone and accessories before relying on the setup.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone-size flexibility
The clamp supports phones 57–88 mm wide, accommodating a broad range of handset sizes.
Mounting options
A 1/4-inch-20 threaded hole and a cold shoe at the bottom provide two ways to connect it to a camera or tripod.
Framing adjustability
Two rotary joints offer 180-degree adjustment, and the holder can switch between landscape and portrait orientation.
Accessory integration
A top cold shoe accepts a microphone or light, and spaced threaded holes support specified power bank holders.
Load planning
The stated maximum load is 500 g, so the combined weight of the phone and mounted accessories needs attention.
Portability
At 73 g and about 4.06 × 1.63 × 1.23 inches, the holder is a compact addition to a mobile recording kit.
Key Features and Specifications of SMALLRIG Phone Mount
- Phone clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the bottom cold shoe.
- Top cold shoe is designed for an accessory such as a microphone or light.
- Spaced threaded holes are designed for SMALLRIG power bank holders 2336 and 2790.
- The holder weighs 73 g, measures about 4.06 × 1.63 × 1.23 inches, and has a stated maximum load capacity of 500 g.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Fits phones across a useful 57–88 mm width range.
- Supports both portrait and landscape framing with a 90-degree locking position.
- Offers two bottom mounting interfaces for camera and tripod setups.
- Adds a top cold shoe and threaded expansion points for selected accessories.
Consider before buying
- The 500 g maximum load requires buyers to account for the phone and any mounted accessories together.
- A clamp takes more hands-on positioning than a magnetic mount designed for compatible phones.
- The package includes the phone holder only, so a camera, tripod, microphone, and light need to be sourced separately if required.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider the 4382 if you record with a phone and want to mount it on a camera or tripod while keeping a light or microphone nearby.
Its width adjustment and portrait-to-landscape rotation make it a practical fit for creators who change framing or share equipment between phones.
Before buying, measure the phone across the width the clamp will grip, including any case you plan to leave on. Then add up the phone and accessory weights and compare the total with the 500 g capacity.
Check that your camera or tripod connection matches one of the mount’s bottom interfaces.
Who should skip it
Skip this design if your priority is a magnetic snap-on workflow or your phone falls outside the 57–88 mm width range. For heavier setups, first confirm the combined load stays within the stated 500 g maximum.
How the SMALLRIG Phone Mount fits a mobile camera setup
Clamping and phone fit
The 57–88 mm range makes this holder adaptable to multiple handset widths.
Since fit depends on the phone at the point where the clamp grips it, measure with the intended case in place and confirm the clamp can hold the phone without pressing on buttons.
Changing orientation and angle
Portrait and landscape support, a locking position at 90 degrees, and two rotary joints allow adjustments while composing a shot.
This combination can help when switching between vertical and horizontal content, though buyers should plan where the phone and its controls will sit relative to the camera.
Mounting the phone and accessories
The bottom 1/4-inch-20 threaded hole and cold shoe offer alternate camera or tripod connections, while the top cold shoe gives a place for a microphone or light. The additional threaded holes are intended for specified power bank holders.
These interfaces make the holder more adaptable, but each added item contributes to the 500 g maximum load.
Weight and kit planning
At 73 g and roughly four inches tall, the holder can fit into a compact mobile filming kit.
Its own light weight does not determine whether a full setup is within capacity: include the phone and every accessory attached to the holder when checking the load.
Alternatives to SMALLRIG Phone Mount
One alternative is included because it offers a distinct magnetic attachment approach for compatible iPhones.
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount 5156
Choose the 4382 if adjustable width is the key requirement or you need a holder for phones beyond the 5156’s stated MagSafe iPhone compatibility.
Consider the 5156 if you have a compatible iPhone and prefer magnetic attachment; its description also cautions that external impacts may cause the phone to detach.
Both list a 500 g load capacity, so check the combined load either way.
- The 5156 is designed for iPhone models with MagSafe functionality.
- It has two rotating shafts, a bottom 1/4-inch-20 thread and cold shoe, middle threaded holes, and a detachable top plate that can serve as a mounting plate for accessories.
- The 4382 uses an adjustable clamp for phones 57–88 mm wide and supports the phone through two rotary joints.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for phone-based filming where adjustable fit, orientation changes, and accessory mounting matter.
Its appeal is the combination of a wide clamp range, flexible positioning, and camera or tripod connection options in a lightweight holder.
Check phone width with its case, confirm your camera or tripod connection, and keep the complete mounted setup under 500 g.
If those constraints fit your workflow, the 4382 is a practical choice for a flexible mobile recording rig.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A versatile clamp for creators who want to mount a range of smartphones on a camera or tripod and add a light or microphone.
- Phone clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Switches between portrait and landscape orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Attaches to a camera or tripod using a 1/4-inch-20 threaded hole or the bottom cold shoe.